Product category
Programmable power supplies
At Schulz-Electronic, you will find programmable AC and DC power supplies from renowned manufacturers. We offer everything from adjustable laboratory power supplies, through constant-voltage and switching power supplies, to bidirectional high-performance power supplies with a feed-back function.
Thanks to analogue and digital interfaces and a wide range of control modes, the units can be precisely tailored to individual test requirements. As specialists with over 50 years’ experience, our team of experts is also on hand to assist you with selection and system integration.
AC sources DC sources AC/DC sources


A controllable power supply tailored to your application
Unlike a power supply unit with fixed settings, a programmable power supply can be individually configured to suit your specific application. The setpoints for voltage, current and power are not mechanically fixed, but can be set – depending on the model – via front-panel controls, a touch panel, analogue interfaces and a wide range of digital interfaces.
Whether as a programmable current source, a programmable voltage source or a conventional controllable power supply: the unit adapts to your test setup, not the other way round. Whether a constant-current source (CC mode) or a constant-voltage source (CV mode, including internal resistance simulation Ri), whether power-regulated (CP mode) or with resistance control during load operation (CR mode) – the control modes of our programmable constant-current and constant-voltage sources enable your application. Via interfaces such as LAN, USB or CAN, the power supply can also be integrated directly into existing test systems and controlled remotely – without the need for manual intervention on the unit.
What to look out for when making your choice
| Control mode | Determines which control mode is active: CC, CV, CP or CR. Many devices switch automatically between modes (cross-over) or can be specifically configured for source or sink operation, U-I characteristics, and PV, battery or fuel cell simulation. |
| Voltage, current and power range | The minimum and maximum ranges of the electrical parameters depend on the test requirements, test procedure, DUT and application. To ensure flexibility, expandable master/slave power supply systems can be used to accommodate subsequent increases in curren |
| Source and load functions | Some devices operate solely as a DC power source, whilst others also function as a sink: such bidirectional source-sink units can also absorb energy (power sink function) and thus operate as a load. In the case of regenerative, bidirectional st |
| Interfaces | Digital interfaces such as LAN, USB, CAN, RS232, ETH, ETHCAT and GPIB are essential for integration into automated test systems. Analogue interfaces also enable direct, rapid control. |
| Regulated speed and residual ripple | In sensitive applications, short response times and low output ripple are crucial for reproducible measurement results. For highly dynamic applications, we offer high-speed DC power supplies with rapid load step response, as well as |
| Cooling method and design | The choice of air- or water-cooled models, as well as desktop or 19-inch rack mounting, depends on the location and ambient conditions. |
| Scalability | Master/slave operation, as well as the parallel or series connection of several devices, makes it possible to expand performance at a later date. |
Find the right power supply for your application
The right design for every application - from a robust DC power supply to a power supply with energy recovery.
DC power supplies for precision test set-ups
Stable, finely adjustable DC voltage in the form of a regulated DC power supply - ranging from compact benchtop units to regulated high-voltage power supplies in a 19-inch rack, which can be combined via master/slave operation where required.
AC and AC/DC power supplies for realistic mains testing
Simulate real-world mains conditions – from adjustable AC-AC power supplies, through adjustable DC power supplies and adjustable AC-DC power supplies, to programmed mains disturbances involving harmonics or frequency fluctuations. This allows you to test how your product behaves under varying mains conditions.
Bidirectional power supplies for efficient energy recovery
Acts as both a power source and a load within a single device, feeding surplus energy back into the grid rather than converting it into heat. Ideal for battery and drive tests involving energy recovery.
Do you know what you need, but can’t find the right product?
Save yourself the effort of a time-consuming search: our experts will quickly find the solution that’s exactly right for your application.
Request a consultation now
A wide selection, a single point of contact: programmable power supplies from leading manufacturers
Do you already have a favourite brand in mind? You can find Delta Elektronika, ITECH, Regatron, TDK-Lambda and other manufacturers of programmable power supplies in our manufacturer overview.

Schulz-Electronic: Your partner for programmable power supplies
For over 50 years, we have been supporting customers in industry and research with the selection and integration of programmable power supplies – whether adjustable current supplies, adjustable voltage supplies or complete systems. As a manufacturer-independent partner, we focus on your specific application.
Manufacturer-independent advice: With over 1,000 products from more than 16 manufacturers in our portfolio, we recommend the solution that best suits your application.
Support throughout the entire life cycle: from test equipment before the project begins, through on-site training, to after-sales repair services – we are by your side even whilst your equipment is in operation.
Certified quality: Our ISO 9001-compliant quality management system, supplemented by TÜV certification, ensures the reliability of every solution we deliver.
Frequently asked questions about programmable power supplies
In practice, the two terms are largely used interchangeably. ‘Programmable’ usually emphasises the ability to set values digitally via an interface and control them automatically, whilst ‘regulatable’, ‘variable’ or ‘adjustable’ power supplies describe the adaptability of the output in more general terms.
CC stands for constant current, CV for constant voltage, CP for constant power and CR for constant resistance. Many devices switch automatically between these modes, depending on the requirements of your test setup.
Yes. The devices can be integrated into existing test systems via interfaces such as LAN, USB, CAN, RS232 or GPIB, as well as via application programming interfaces (APIs) and integrations such as LabVIEW.
Yes. We develop and supply bespoke power supply solutions from as little as one unit, ranging from system modifications to the construction of complete racks.
Please discuss your requirements with us
Whether it’s a data sheet, a set of requirements or a specific specification: our experts are familiar with the full range of programmable power supplies available on the market and will work with you to find the driver that matches the current, voltage, operating mode and interface of your application.
Enquire now