Power supplies for lasers: We’ll find the right solution for your application
Whether based on an existing laser data sheet or for a laser system under development: we supply the right power supply for your laser diode, tailored to your requirements in terms of current, voltage and safety.
Get in touch now Laser diode power supply systems


Whether you’re a laser expert or an electronics specialist – we’ll find the right solution for your laser system
Schulz-Electronic is familiar with both scenarios and will guide you towards the right laser diode power supply – whether you already know exactly which electrical parameters are required, or you know your laser diode inside out but are still looking for the right power supply for it.
For electronics experts who know what their driver needs to deliver
You know the requirements for current, voltage and control behaviour for your application; all that’s missing is the right driver. With a broad portfolio ranging from CW to high-current pulse drivers, and customised configuration straight from the factory, we’ll find the solution that matches your specifications exactly.
For laser experts looking for the right power supply
You know exactly how your laser works, but what power supply it needs is another matter. Send us your datasheet: we’ll analyse the requirements and recommend the right solution from our range.
Our expertise: from basic services to system solutions
Depending on the application, laser diodes place very different demands on their power supply, ranging from simple continuous-wave (CW) operating points to highly dynamic pulsed modes with stringent safety requirements. We are familiar with this wide range and offer the right solution for every operating mode.

Continuous wave (CW)
For continuous operation, the power supply for laser diodes requires stable, low-noise regulation with minimal ripple. Even slight fluctuations have a direct impact on beam quality and the diode’s service life. Our product range extends from compact OEM drivers to high-power CW sources delivering up to 450 A and more, and, where required, into the three-figure kilowatt range – each precisely configured to your operating point.

Pulsed operation & QCW
Pulsed applications require fast current rise times and precise control, ranging from short microsecond pulses right through to the quasi-continuous (QCW) range. In practice, the boundaries between these two operating modes are often blurred. We are familiar with both. For precise trigger and timing control, we also offer dedicated pulse and delay generators from our product range.

Modulation
In modulation, the output current follows a defined waveform. Depending on the application – for example, in measurement technology or analogue control loops – a modulatable power supply with the appropriate bandwidth and an analogue interface is required. We offer analogue-modulable drivers up to the MHz range with current-controlled rise times as low as <50 ns.

Diode stacks & series emitters
Higher optical performance is increasingly being achieved through stacked or series-connected emitters. This drives up both the required currents and the demands placed on the laser power supply. DC/DC boost converters offer an extremely convenient solution for voltages up to approximately 130 V. In addition, step-down converters up to 400 V or AC/DC drivers for even higher voltages are available.

Electronic Security (SES)
With modern fibre lasers and their monolithic architecture, protection via mechanical shutters is often no longer sufficient – or is not technically feasible at all – from the source to the beam exit. Our SES semiconductor safety switch enables operation compliant with EN 13849-1 up to Performance Level e / Cat. 4 by directly isolating the laser diode from the driver. High cycle rates and wear-free operation minimise operating costs.

Customised system solution
Whether it’s an individual component or a fully integrated rack system: our solutions are configured to suit specific applications rather than being supplied from a catalogue. If required, a suitable air- or water-cooling concept is also integrated into the solution. In this way, we combine drivers, safety concepts and mechanical integration into a comprehensive solution that is precisely tailored to your system.

Suitable devices for the laser diode driver power supply
Whether CW, pulsed or QCW: in our product range, you’ll find the right laser power supply for almost any operating mode and power class.
Do you already know which driver is right for your application, or would you like to get an overview of our entire range? If so, you’ll find a direct comparison of all our laser diode drivers here.
Laser power supplies: applications and sectors
The requirements for laser diode drivers vary greatly depending on the field of application – from 24/7 production operations to highly flexible research environments. We understand the specific characteristics of each industry and tailor our solutions accordingly.

Industrial Manufacturing & Materials Processing
High availability, reproducible results, robust system integration: in industrial manufacturing, every second of downtime counts. Whether driving high-power fibre lasers or in precision cutting processes – our drivers are designed for continuous operation and long operating cycles.

Medical technology
In medical technology, precision and compliance with standards are paramount. Our laser diode drivers meet the specific reliability and safety requirements demanded by medical applications.

Research & Science
Rather than a one-size-fits-all solution, what counts here is maximum flexibility and adaptability. Schulz-Electronic is quick to embrace new technologies – research clients often bring with them the requirements of tomorrow, to which we continually adapt our portfolio.

Defence / Drone defence
A growing field of application with highly specific performance and safety requirements: from battery-powered IP67 systems to high-current pulse drivers, we supply robust solutions for demanding defence applications.

Schulz-Electronic: Your development partner for laser diode power supplies
We don’t just supply the right power supply; we support you every step of the way, from the initial requirements analysis right through to the solution being put into operation. As your development partner, we work with you to design your application, rather than simply selling you a device.
Expert engineering advice: Our technical sales team asks targeted questions and highlights any issues that certain parameters may cause. We’ll guide you to the right product.
A wide-ranging portfolio for every operating mode: from CW to short pulses, from single drivers to rack-mounted systems – there are very few applications for which we do not have a solution.
Customised configuration rather than off-the-shelf solutions: It is rare for us to simply receive an order for a standard product. We assess existing components or develop application-specific solutions – tailored to your specific needs.
Development partners for testing, research and industry: We are not just a supplier, but a development partner – including for further development – working alongside customers or suppliers.
Frequently asked questions about laser diode power supplies
Laser diodes are highly sensitive to voltage spikes and current surges. A suitable power supply must therefore have very low ripple and be equipped with protective mechanisms to safeguard the diode against overload.
In CW (Continuous Wave) mode, the diode operates continuously at a constant current. In pulsed mode, the current is switched on and off at defined intervals – ranging from short microsecond pulses to the quasi-continuous (QCW) range.
In pulsing, the current is switched on and off. In modulation, by contrast, the output current follows a defined waveform – for example, in analogue control loops or measurement applications.
A suitable laser diode power supply features precise current limiting as well as current and voltage monitoring to reliably prevent over-shoot and damage to the diode.
In modern fibre lasers with a monolithic architecture, a mechanical shutter is often no longer technically feasible or is inadequate. Electronic safety switches, such as our SES series, isolate the laser diode directly from the driver and enable operation in compliance with standards up to Performance Level e / Cat. 4.
Yes. Based on your data sheet, we will analyse the relevant electrical parameters of your laser diode and recommend the most suitable solution from our range.
Laser diodes are highly sensitive to their operating conditions: voltage spikes or current overshoots can drastically shorten their service life or destroy them instantly. To operate a laser diode safely, a power supply specifically tailored to it is therefore required, featuring precise current limiting, minimal ripple, and current and voltage monitoring. In high-power systems, a standard-compliant safety shutdown is also required – for example, via electronic safety switches such as our SES series, which reliably disconnect the laser diode from the driver up to Performance Level e / Cat. 4.
Discuss your requirements with us
Whether it’s a data sheet or a set of requirements, a detailed specification or an initial idea: our experts will advise you on the current, voltage, pulse dynamics and safety of your laser diode power supply – and work with you to find the right solution.
Request a quote now






